Rollercoat - Method Statement

Method Statement

PDF version for print

« Back to product list

1. The rendered surface must have cured for 7 - 10 days.
The appearance of the render must be dry.

2. Mask up all areas not to be coated, i.e. gutters, windows, doors etc.

3. Apply 1st coat of Renotex Rollercoat smooth thinned by up to 10% using manufacturers' thinners.
Apply by sheepskin or simulated sheepskin roller.
1st coat must be left to cure overnight.

4. Apply 2nd coat of Renotex Rollercoat by roller thinned 5% to 10%. **

5. Coverage for two coats is 2 sq metres per litre.

** Please note if Hi-Build is used for the 2nd coat add same amount of thinners and apply with honey-comb sponge roller. Coverage will be 1 sq metre per litre.

This method statement is to be used in conjunction with the application guidelines on the reverse of the Renotex Rollercoat work-sheet.

Preparation Guidelines

Rollercoat has a life expectancy of over 10 year when applied correctly to properly prepared surfaces. Performance of the product is directly related to the standard of perparation and quality of the substrate.

Preparation	Brick			Render
Preparation	New	Old	Pntd	New	Pntd
Brush down to remove dust etc.
Stiff brush to remove flaking paint, dirt etc.
Power wash if necessary to remove flaking paint, dirt etc.
Check adhesion of render - hack off where necessary and repair.
Hairline cracks to be filled with Flexible Filler.
Hack off and make good blown Pebbledash or Tyrolean.
Wire brush loose & damaged pointing from brickwork joints and make good if required.
Treat algae and lichen growth with Reno Anticide Wash.
Reface spalling and crumbling brickwork if required.
Primer for use on friable or porous surfaces. Prime with 10% dilution of Rollercoat and approved solvent.

« Back to product list

Renotex Limited • Pollard Street • Lofthouse Gate • Wakefield • WF3 3HG •
Tel: (01924) 820003 • Fax: (01924) 829529 Email: sales@renotex.co.uk
Copyright © 2004 Renotex Ltd. All rights reserved.
Site design & hosting by On Screen

Renotex Ltd is a subsidiary company of Walltex Coatings (Manufacturing) Ltd of Wakefield UK, who have been manufacturing coating systems and building maintainence products for trade and retail applications for over 20 years.