Rollercoat

Click here to read about our 25 years proof of performance

ROLLERCOAT is a unique long life exterior weatherproof coating. It has a smooth finish, but is also available with added fine aggregate to give a HIGH BUILD textured finish. Applied 10 times thicker than ordinary paint. Available in any of our 12 standard colours + other colours and various textures.

USES:

ROLLERCOAT is an ideal coating for concrete, metal, masonry, blockwork, render, pebbledash, brick, asbestos / cement panels, prefabricated structures, profiles and most painted surfaces.

MSDS

Download Material Safety Datasheet for Reno Rollercoat

ADVANTAGES:

Weather resistant.
Allows walls to breathe.
Resists penetrating damp.
Will not chip, flake or peel.
Built in fungicides.
Excellent resistance to stains and dirt.
Can be hosed down.
Excellent colour retention.
Tough and flexible.
Excellent adhesion.

FORMULATION:

ROLLERCOAT is manufactured at our own factory to an exact specification and quality control. The formulation is based on extremely durable synthetic elastomer polyester resin, blended with polybutene for flexibility. It contains mica, titanium dioxide, zinc oxide, silicon, fungicide and special colour components to provide long lasting colour retention, weatherproofing, protection and durability.

ROLLERCOAT may be applied at any temperature using a roller, brush or airless spray equipment. The addition of no more than 10% solvent will be permitted to adjust for any change in viscosity due to lower temperature.

COVERAGE:

Depending on the surface, coverage is 2 square metres per litre.

PACKAGING:

Supplied in 20 litre metal resealable drums.

DRYING TIMES:

Surface dry in 8 hours. Fully cured in up to 7 days, depending on temperature.

COLOURS:

White

Magnolia

Cream

Waterlily

Yorkstone

Oakland

Driftwood

Harvest

Mint Green

Champagne

Brick Red

Mid Grey

MEDITERRANEAN RANGE:

Special order: small extra cost.

Apple White

Mimosa

Morning Sky

Jade

Carnation

Spanish Gold

Terracotta

Tuscan

COLOUR MATCHING SERVICE

Colours to match your own style requirements. Please call for details and prices.

SMOOTH AND TEXTURES AVAILABLE:

Rollercoat Smooth

Apply in 2 coats by brush or roller.

Rollercoat Stipple

Apply 1st coat in smooth. Apply 2nd coat of rollercoat smooth with honeycomb roller to give stipple finish. Click on image for detail

Rollercoat High Build

Apply 1st coat in smooth. 2nd coat of HIGH BUILD apply with honeycomb roller. Click on image for detail

TECHNICAL HELP:

For further information and advice on all Renotex products please contact our Head Office or Distributor.

TEST SUMMARIES - RENOTEX MASONRY COATING:

TEST	BSI Ref.	RESULTS and REMARKS
FLEXIBILITY	BS.3900 (1970) Part E1	RENOTEX contains POLYBUTENE for flexibility. It can be coated on to a piece of plastic and bent through and angle of 180° without cracking.
RESISTANCE TO EXTREME TEMPERATURE		RENOTEX is not damaged by temperatures as low as -20°C or as high as +120°C.
WATER VAPOUR PERMEABILITY	BS 3177 (1959)	The tests show a permeability of 4.5 – 5.0 grams /M² per day when tested at 25°C and a relative humidity differential of 75%.
LIQUID WATER PERMEABILITY	BS 473 (1967)	The result is 1.3 ml/cm x 10-6. The results show RETONEX is virtually impermeable towards liquid water and the permeability values are comparable with bituminous roofing felt.
EFFECT OF FIRE	BS 476 (1971) Part 7	The non-combustible inorganic constituents retard the surface spread of flame over treated surface. Class 1 was achieved.
RESISTANCE TO HUMIDITY	BS 3900 (1966) Part 2	The texture of the coating was unchanged. Adhesion to brick and plywood is excellent.
RESISTANCE TO SALT WATER, SULPHIDE STAINING AND ACIDIC CONDITIONS	BS 1391 (1952)	No signs of deterioration were observed.
RESISTANCE TO ALKALIES FROM THE BACKGROUND	BS 3900 (1966) Part F	The tests showed no blue discolouration and RENOTEX showed good adhesion and was unchanged after the test.
COLOUR FASTNESS TO LIGHT	BS 2782 (1982) Part 5 Method 540B	RENOTEX shows excellent colour fastness when exposed to different light sources over extended periods. BS Fastness No.7 or better.
RESISTANCE TO FUNGAL GROWTH	BS 3900 (1971) Part G6	RENOTEX contains ALGON 100 to prevent fungal growth or mould growth.
WEATHER RESISTANCE (ACCELERATED WEATHERING TESTING)	BS 3900 (1971) Part F3	Shows no signs of flaking, peeling or embrittlement when subjected to an accelerated weathering test. This continuous testing shows the material to be capable of weathering externally in the United Kingdom without serious defects developing for 20 – 30 years.
CLEANING TEST		RENOTEX is self-cleaning by rainfall, but can be cleaned by hosing down. RENOTEX will withstand over 5000psi pressure washing without losing adhesion.

PAINT/RENOTEX COMPARISON ANALYSIS:

Description	Water Based Paint	Renotex ROLLERCOAT Resin Based Coating
Manufacturers Guarantee	None	10 Years
Average 'Proof of Performance'	3 Years	25 Years +
Types of Users	Contractors/DIY	Contractors/DIY
Weather Resistant	Poor/Medium	Excellent
Colour Choices	Very Good	Very Good
Application Temperature	Restricted by Low Temp	Unrestricted
Chipping/Peeling Resistance	Poor	Excellent
Flexibility	Poor	Excellent
Lowest Yearly Cost	No	Yes
Thickness of Coating	Poor	10 Times Thicker

METHOD STATEMENT:

Surface preparation:
Remove flaking and loose material with stiff brush or powerwashing.
Organic growth to be treated with RENO ANTICIDE wash.
Ensure all surfaces are dry, clean and firm.
Surfaces which are friable and porous should be primed with a 10% dilution of ROLLERCOAT and Renotex thinners.
Uneven painted surfaces are to be primed with RENO BOND/RENO PREP mix.
The rendered surface must have cured for a minimum of 7 days.
The appearance of the render must be dry.
All surfaces must be dry before application.
Mask up all areas not to be coated, i.e. gutters, windows, doors etc.
Apply 1st coat of Renotex ROLLERCOAT smooth thinned by up to 10% using Renotex thinners.
Apply by sheepskin or simulated sheepskin roller.
1st coat must be touch dry before applying 2nd coat.
Apply 2nd coat of Renotex ROLLERCOAT by roller thinned 5% to 10%.
Coverage for two coats is 2 sq metres per litre. **
** Please note if HI-BUILD is used for the 2nd coat add same amount of thinners and apply with honeycomb sponge roller. Coverage will be 1 sq metre per litre.

This method statement is to be used in conjunction with the following application guidelines.

Preparation	Brick			Render
Preparation	New	Old	Pntd	New	Pntd
Brush down to remove dust etc.
Stiff brush to remove flaking paint, dirt etc.
Power wash if necessary to remove flaking paint, dirt etc.
Check adhesion of render - hack off where necessary and repair.
Hairline cracks to be filled with Flexible Filler.
Hack off and make good blown Pebbledash or Tyrolean.
Wire brush loose & damaged pointing from brickwork joints and make good if required.
Treat algae and lichen growth with Reno Anticide Wash.
Reface spalling and crumbling brickwork if required.
Primer for use on friable or porous surfaces. Prime with 10% dilution of Rollercoat and approved solvent.

Please note: uneven painted surfaces are to be primed with RENO BOND ADMIX / RENO PREP primer.