SURFACE PREPARATION

1 On new floors - the floor must be dry and cured.
2 On old floors – make sure all repairs are cured.
3 RENO FLOOR can be applied over existing paint. Remove flaking and loose material or dirt with a stiff brush or power washer to establish a firm base.
4 Ensure all surfaces are dry, clean, firm and have a damp proof membrane so the coating can adhere for long life.
5 For best results apply 2 coats by brush or roller. Allow 1st coat to dry before applying second.
6 Depending on the surface the coverage for 2 coats should be 4 sq metres per litre.

Adequate ventilation to be provided and appropriate clothing and mask to be worn.