• Rollercoat
  Weatherproof Wall Coating
• Reno Prep Render
  Pre Bagged Render
• Reno Drive Sealer
  Fast Drying Block Drive Sealer
• Renotex Indian Stone
  Renovate/Enhance Indian Stone
• Reno Roof
  Durable Penetrating Roof Sealer
• Reno Bond Admix
  Latex Copolymer Resin Ad Mix
• Reno Floor
  Hardwearing Floor Coating
• Reno Anticide
  Low Toxicity Biocide
• Reno Dry / Reno Dry 2R
  Water Repellent Clear Sealer
• Reno Pool Coat
  Pool Surround Coating
• Reno Seal
  Clear Sealer for Concrete Floors
• Tarmac Revive / Repair
  Performance Tarmac Repair
• Reno Step Safely
  Coloured Anti Slip Coating
• Spray Textured Coating
  Professional Coating
• Renotex Line Paint
  For car parks and road markings.

Reno Seal

RENO SEAL is a clear sealer for concrete floors, patios, kennel and cattery floors. This product is suitable for problematic floors where no damp proof membrane is present.

RENO SEAL is a hardwearing durable, abrasion resistant, clear sealer for exterior or interior use. RENO SEAL seals and protects concrete floors or walls.

USES:

RENO SEAL is ideal for concrete (new or old), industrial, garage and workshop floors, shopping centres, concrete paving and stone patios.

ADVANTAGES:

• Hardwearing, tough and flexible.
• Excellent adhesion and penetration.
• Minimum surface preparation needed.
• Quick and easy to apply.
• Fast drying, minimum disruption.
• Good gloss finish and hardness.
• Resistant to detergent, oil, diesel, food and drink stains, acids and alkali.
• Urine resistant for kennels and catteries.
• Can be hosed and cleaned easily, soap and detergent resistant.
• Non-slip formulation also available.

FORMULATION:

RENO SEAL is manufactured at our own factory to an exact specification and quality control. The formulation is based on a thermoplastic acrylic copolymer resin possessing excellent colour gloss retention and exterior durability; selected to provide hard and tough films yet with sufficient plasticising character to maintain flexibility.

APPLICATION:

RENO SEAL may be applied at any temperature using a roller or brush. For best results, apply in two coats, allowing the first coat to dry before applying the second. DO NOT THIN DOWN.

COVERAGE:

Depending on the porosity if the surface, coverage for two coats is 2 to 3 square metres per litre.

PACKAGING:

Supplied in 20ltr resealable drums.

METHOD STATEMENT:

New Floors

1. Allow the concrete to cure for 7 days.
2. Apply the RENO SEAL at any temperature using a brush or roller.
3. Apply in 2 coats allowing the 1st coat to dry before applying the second.
4. Apply at the rate of 2 - 3 sq metres per litre (depending on porosity).

Old Floors

1. If surface is painted then remove all old paint using an angle grinder with steel wire cup brush, or a special machine.
2. Old un-painted floors, make good any repairs and allow to cure.
3. Ensure surface is clean and dry, excessive soiling can be removed by a power washer or steam cleaner, grease and oil to be removed by a detergent.
4. Repeat stages 2,3 & 4 from above new floor.
5. Carry out stages 2,3 & 4 from the above list.

Adequate ventilation to be provided and appropriate clothing and mask to be worn.

MSDS

Download Material Safety Datasheet for Reno Seal

EXAMPLE:

Copyright © 2009 Renotex Ltd. All rights reserved.