• Rollercoat
  Weatherproof Wall Coating
• Reno Prep Render
  Pre Bagged Render
• Reno Drive Sealer
  Fast Drying Block Drive Sealer
• Renotex Indian Stone
  Renovate/Enhance Indian Stone
• Reno Roof
  Durable Penetrating Roof Sealer
• Reno Bond Admix
  Latex Copolymer Resin Ad Mix
• Reno Floor
  Hardwearing Floor Coating
• Reno Anticide
  Low Toxicity Biocide
• Reno Dry / Reno Dry 2R
  Water Repellent Clear Sealer
• Reno Pool Coat
  Pool Surround Coating
• Reno Seal
  Clear Sealer for Concrete Floors
• Tarmac Revive / Repair
  Performance Tarmac Repair
• Reno Step Safely
  Coloured Anti Slip Coating
• Spray Textured Coating
  Professional Coating
• Renotex Line Paint
  For car parks and road markings.

Reno Anticide

RENO ANTICIDE is a low toxicity biocide with high antimicrobial activity combined with a detergent.

APPLICATIONS:

ANTICIDE is a carefully formulated preparation based on a benzalkonium chloride and phenyl phenol. Both of these chemicals have been cleared under the UK Pesticides Regulations. Also approved for use as a veterinary hygiene product.

BIOCIDAL PROPERTIES:

ANTICIDE is completely effective in eliminating the growth of bacteria, yeasts, fungi and algae which occurs on all types of surfaces. ANTICIDE has a wide spectrum of activity which includes the following species of microorganisms most commonly responsible for such unsightly and damaging organic growth.

BACTERIA	FUNGI	ALGAE
Bacillus sp.	Aspergillus sp.	Chlorella sp.
Flavobacterium sp.	Aureobasidium sp.	Nostoc sp.
Klebsiella sp.	Candida sp.	Pleurococcus sp.
Pseudomonas sp.	Cladosporium sp.	Oscillatoria sp.
Staphylococcus sp.	Rhodotorvla sp.	Trentepohlia sp.
	Streptomyces sp.
	Penicillium sp.

APPLICATIONS:

Surface sterilant, plant hygeine and kennels & catteries etc.

ANTICIDE is recommended as a surface sterilant for either maintenance or pre-decoration of masonry, brick, wood, plaster etc and also for kennels & catteries.

COVERAGE:

Using low pressure spray equipment, brush or roller. Application should be made at the rate of 2 to 3 square metres per litre.

Packaging supplied in 20 litre resealable containers.

METHOD STATEMENT:

1. Brush down or power wash to remove any moss or algae etc.
2. Using low pressure spray equipment, brush or roller, apply RENO ANTICIDE at the rate of 2 to 3 sq metres per litre.
3. Leave the RENO ANTICIDE on the wall to dry and then proceed with the application of other Renotex products.

IF POWER WASHING IS NOT POSSIBLE

RENO ANTICIDE contains a powerful detergent Phenyl Phenol, when scrubbed on the wall with a stiff or wire brush the action will produce a foaming effect that will remove dirt, excess moss and algae. Vigorously scrub the wall and leave for 15 minutes then wash off and re apply a fresh coat of Anticide and leave to dry.

Copyright © 2009 Renotex Ltd. All rights reserved.