1. Brush down to remove dirt.

2. Power wash if necessary.

3. Moss or algae to be treated with Reno Anticide.

4. Mask up windows and doors.

5. Starting at the top of the building, the application of Reno Dry 2R is done in 2 coats by brush, roller or low-pressure spray, sufficient material is to be used to flood coat the wall and allow to run down 150mm to 300mm (depending on the density of the surface).

6. Applications to be at the rate of 1 to 2 sq metres per litre for the 2 coats (depending on the porosity and density of the substrate).

7. A third coat may be necessary on substrates that are very porous.

8. At least 2 to 4 hours should be allowed between coats.

Protective clothing, gloves or goggles and protective mask must be worn.