1. Brush down or power wash to remove any moss or algae etc.

2. Using low pressure spray equipment, brush or roller, apply Reno Anticide at the rate of 2 to 3 sq metres per litre.

3. Leave the Reno Anticide on the wall to dry and then proceed with the application of other Renotex products.

IF POWER WASHING IS NOT POSSIBLE

Reno Anticide contains a powerful detergent Phenyl Phenol, when scrubbed on the wall with a stiff or wire brush the action will produce a foaming effect that will remove dirt, excess moss and algae. Vigorously scrub the wall and leave for 15 minutes then wash off and re apply a fresh coat of Anticide and leave to dry.